Quick Disconnect Couplings - Flipbook - Seite 249
Access Methods
Remote Access
The FLOCS Remote Access Conversion Kit
replaces the old drain plug with a 90 degree pan
adapter, hose assembly and quick-disconnect
coupling.
Installation:
Evacuation:
1. Remove old drain plug.
When it is time to change
the oil:
2. Replace with the proper
size FF1187 pan adapter.
1. Remove the dust cap.
3. Install mounting bracket
(and optional 90˚
adapter).
2. Connect the evacuation
hose to the quickdisconnect coupling.
4. Attach hose assembly to
FF1187 pan adapter and
mounting bracket.
3. Activate the pump, and
the used oil is quickly
evacuated to storage
tanks.
5. Attach coupling and
dust cap.
Your installation is now complete.
4. Disconnect the
evacuation hose and
replace the
dust cap.
Direct Access
The FLOCS Direct Access Conversion Kit uses the
Danfoss-developed FD14 Drain Coupling as an
alternative to the standard remote hose kit. This
coupling design permits easy, one-hand connection
and disconnection of the evacuation unit’s hose.
Installation:
Evacuation:
1. Remove old drain plug.
When it is time to change
the oil:
2. Replace with the
proper size FD14 Drain
Coupling.
3. Install protective cap.
Your installation is now
complete.
1. Remove the protective
cap.
2. Connect the evacuation
hose to the FD14 Drain
Coupling.
3. Activate the pump, and
the used oil is quickly
evacuated to storage
tanks.
4. Disconnect the
evacuation hose and
replace the protective
cap.
Danfoss Quick Disconnect Couplings Master Catalog
AF435258198969en-000102
249
