Quick Disconnect Couplings - Flipbook - Seite 250
AMER region
Evacuation Systems
(Part No. FF9330A-01) Remote Access
(Part No. FF9330A-19) Direct Access
FLOCS 30A
Air-powered Unit
The FLOCS 30A Oil-evacuation Unit is a versatile, air-powered
unit designed to be used where an air-power source is available,
and electrical units may present a fire hazard. The unit can be
adapted for use either on a lube truck or in a maintenance bay.
A FLOCS 30A unit can be used with equal effectiveness on
vehicles with small oil-pan capacities (taxicabs, delivery trucks,
school buses, etc.), medium capacities (highway equipment,
tree-harvesting equipment, etc.) or large capacities (mining or
construction equipment, etc.). Speed, ease of operation and
versatility make the FLOCS 30A the best rapid oil-evacuation unit
for many applications.
1.
Piston pump
6.
Coupling half**
2.
5 cfm air-operated motor
(80-150 psi)
7.
Suction strainer
8.
1/4" air-supply coupling
1/4" air-supply nipple
3.
Override button
9.
4.
Cycle gauge
5.
15' of 1" I.D. suction hose*
10. 1" NPT discharge port
FLOCS 15
Electric-powered Unit
*
FLOCS 30A Oil-evacuation Unit with 25' hose assembly
is ordered by part number FF9330A-100 (Remote
Access), FF9330A-20 (Direct Access).
**
Differs with access method.
(Part NO. FF9315-01) Remote Access
(Part No. FF9315-28) Direct Access
The FLOCS 15 Oil-evacuation Unit is electric powered and is
designed for use in fleet maintenance service bays. Used in
conjunction with overhead oil-dispensing reels, the FLOCS
15 speeds oil changes in large fleets. In some multilane
maintenance shops, the FLOCS 15 concept has been used to
implement a “fast-lane” operation, with one lane set aside for
high-frequency, routine maintenance functions, leaving the other
lanes free for more complex and time-consuming operations.
The FLOCS 15 is compatible with existing oil service equipment
and can be installed quickly, without interrupting normal
maintenance operations. It discharges old oil into existing
storage tanks and shuts off automatically when the old oil has
been evacuated. A signal light goes off when the evacuation is
complete.
1.
3/4" hp electric motor,
115V AC, 20 amp
6.
Coupling half**
7.
Suction strainer
115V AC flow-control switch
2.
Gear pump
8.
3.
Cycle-run starter button
9.
4.
Cycle-run signal light
5.
15' of 1" I.D. suction hose*
*
FLOCS 15 Oil-evacuation Unit with 30' hose assembly
is ordered by part number FF9516-01 (Remote Access),
FF9516-02 (Direct Access).
**
Differs with access method.
Backflow check valve with a
3/4" NPT discharge port
Danfoss Quick Disconnect Couplings Master Catalog
AF435258198969en-000102
250
