Quick Disconnect Couplings - Flipbook - Seite 253
AMER region
Oil Thief System
Providing easy access to
oil samples for spectrographic analysis.
With the spectrographic
analysis of engine oil being
increasingly required, the
problem of obtaining oil
samples quickly, economically
and efficiently has demanded
more attention.
Physical Characteristics:
Operating Instructions:
Buna-N Seals for -40 to +225
Degrees Fahrenheit Service.
Vacuum Capable to 28” Hg.
The Oil Thief is compatible
with any FLOCS evacuation
unit. Simply install an Oil
Thief between the evacuation
hose line and the coupling
half; then attach a sample
bottle. Wait a few seconds
after starting the evacuation
cycle (to flush away any oil
from the last evacuation);
then depress the sample
collection button for
approximately ten seconds.
Release the button and
remove the sample bottle.
Clean the Oil Thief sample
bottle port, attach another
bottle and you are ready for
the next sample.
In a typical FLOCS system,
a Male NPTF-to-Male NPTF
adapter (2083-12-12s) is used
on one end of the Oil Thief to
connect to the female quickdisconnect coupling.
With the push of a button,
an oil sample can be taken
during the evacuation cycle
of any FLOCS unit and
collected in a standard
sampling bottle for analysis.
It takes less than 15 seconds
to collect an oil sample with
the Oil Thief.
Note: When not in use, the
Oil Thief should have a spare
sample bottle attached to
maintain valve cleanliness.
Because oil-analysis facilities
provide differing oil sample
bottles, the FLOCS Oil Thief
is available with a sample
bottle port thread to match
your needs. (Refer to the
sample bottle thread sizes
and corresponding Oil Thief
part numbers listed in this
chart.)
Features:
Benefits:
• Push-button operation
• No-mess oil sample
• Light weight
• Economical – one Oil Thief per
maintenance bay
evacuation pump
• Repairable seals
• Accepts a wide variety of sample bottle threads
• Allows oil sampling while
oil is still hot, without employee
hazard
Danfoss Quick Disconnect Couplings Master Catalog
Oil Thief Part Number
FF9300-75-0001
FF9300-75-0002
FF9300-75-0003*
FF9300-75-0004*
*Available by special order.
Sample Bottle Thread Size
(In Inches)
1.480-6 (or 38mm)
2.070-6
1.580-6
1.750-6 (or 45mm)
AF435258198969en-000102
253
