Quick Disconnect Couplings - Flipbook - Seite 255
6. Installing the Oil Pan
Drain Fitting
A. Avoid heat. If the hose
must be routed past the
manifold or exhaust pipe,
use Firesleeve for heat
protection.
B. Avoid sharp or abrasive
edges. Use Danfoss
protective coil/sleeve if hose
might be cut or chafed or
use support clamp provided
to avoid abrasion.
Lubricate the O-ring seal on the
Oil Pan Drain Fitting. Screw
the fitting into the oil pan until
the last thread on the upper
set of threads is engaged.
Position the elbow and tighten
the jam nut (two wrenches
needed). Screw the hose
fitting into the elbow and
tighten all connections.
Danfoss Quick Disconnect Couplings Master Catalog
C. Avoid kinking. Tight bents
may kink hose. Observe
bend radius limitations.
AMER region
5. Routing the Hose
Oil may be manually drained
by disconnecting the hose
fitting from the oil pan adapter.
AF435258198969en-000102
255
