Quick Disconnect Couplings - Flipbook - Seite 270
AMER region
QUICK SEAL®
Tube Connectors – Straight Tube Single
Motion/High Speed Leak Test Tool
TC/MTC/RTC/OTC
Pressure to 650 PSI (44 BAR)
OTC
TC
RTC
This self-sealing, automatic locking device works on a push-on, pull-off principle. Instantly connects and seals pressure lines.
TC Tube Connectors
1/8" to 2-1/4" O.D. (3 to 57 mm)
The TC Tube Connectors were originally developed for
production line use on refrigeration coils, but have also earned
overwhelming acceptance for use on compressor units, heat
exchangers and any other assemblies which require a quick, easy
and effi cient way to attach pressure lines to straight end tubing.
RTC Tube Connectors
For short length tubes 1/4" to
1" O.D. (7 to 25 mm)
The RTC Tube Connectors have been specially designed for use
in applications where only a short length of tube is available
for engagement. Just attach the connector to the service
line, depress the lock lever and push on over the tubing, until
the spring loaded seat and plunger assembly is depressed a
minimum of 1/8 inch.
PART material
Danfoss Quick Disconnect Couplings Master Catalog
1
LEVER SPRING stainless steel
2
LOCK LEVER hardened and plated steel
3
QUAD RING neoprene
4
COMPRESSION SPRING stainless steel
5
LEVER PIN hardened and plated steel
6
HEAD anodized aluminum
7
TUBE SEAL neoprene
8
PLUNGER anodized aluminum
9
CYLINDER anodized aluminum
AF435258198969en-000102
270
