Quick Disconnect Couplings - Flipbook - Seite 99
Fluid transfer & Hydraulic application
Global region
The Danfoss Hansen FD85 Series is a thread to connect
coupling most commonly used in Oil and Gas
applications, but can also be found on demanding
applications on both mobile and stationary equipment
where operating pressures of 5,000 psi are present.
FD85 Series
Thread to Connect
Product Features
• Thread to connect feature allows for use
in high vibration and impulse
applications
• Standard body material: Zinc trivalent
plated carbon steel. Stainless steel
construction available upon request
• Connect under pressure capability up to
5,000 psi (345 bar)
• Female NPTF and BSPP ends available
• Standard seal material: Nitrile (NBR), FKM
seals are available upon request
• Wing nut and hex flat design allows for
easy connection and disconnection
• 3/4" design is offered in a hex nut design
Physical Characteristics
Maximum Operating Pressure
Plug/
Male
Half
Minimum Burst Pressure
Socket/
Female
Half
Plug/
Male
Half
Body
Size
Connected
(in)
bar
(psi)
bar
(psi)
bar
(psi)
bar
(psi)
bar
¾"
345
5,000
345
5,000
345
5,000
1,380
20,000
1,380
Connected
(psi)
Socket/
Female
Half
bar
(psi)
Rated
Flow
L/min
20,000
1,380
100
20,000
(gpm)
Fluid
Loss
ml-cc.
Air
Inclusion
ml-cc.
26.4
10
10
1"
345
5,000
345
5,000
345
5,000
1,380
20,000
1,380
20,000
1,380
20,000
189
50
20
26
1 ¼"
345
5,000
345
5,000
345
5,000
1,035
15,000
1,035
15,000
1,035
15,000
288
76
20
40
1 ½"
345
5,000
345
5,000
345
5,000
1,035
15,000
1,035
15,000
1,035
15,000
379
100
83
85
2"
345
5,000
345
5,000
345
5,000
1,035
15,000
1,035
15,000
1,035
15,000
757
200
181
240
Flow Data
Pressure Loss (psi)
37.85
100
Flow Rate (lpm)
378.5
3785
6.9
10
0.69
Presure Loss (bar)
Applications & Markets
• Oil昀椀elds
• O昀昀shore Drilling
• Construction
• Oil and Gas
Lloyd's Register Certification
The FD85 Series carries a Lloyd's Registry Certificate for fire
conditions outlined in API 16D and EUB Directive 36. These parts
meet the requirements that couplings shall be capable of
maintaining pressure when exposed to a 700ºC (1,300ºF)
temperature for a five-minute period in connected state.
Certification only applies to those assemblies where both
mating parts socket/female and plug/male are Danfoss FD85
Series thread to connect couplings.
Danfoss Quick Disconnect Couplings Master Catalog
1
0.069
10
100
Flow Rate (gpm)
1000
AF435258198969en-000102
99
